基于学科间差异信息的协同优化改进算法

分析了MDO(Multidisciplinary Design Optimization)中广泛应用的协同优化算法的特点和存在的问题,提出了一种基于学科间差异信息的协同优化改进算法COMI(Collaborative Optimization based on Multidisciplinary Inconsistency).利用学科间差异信息构造了系统级松弛约束和系统级罚函数,利用遗传算法作为系统级优化算法,并采用标准算例比较了标准CO(Collaborative Optimization)算法、松弛CO算法与COMI算法的性能.结果表明COMI算法在设计结果可行性和最优值上平衡性较好.     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

离心机试验中惯导平台误差系数辨识方法

针对离心机试验中惯导平台误差系数辨识问题,提出一种6位置辨识方案。建立误差系数辨识的非线性模型,再利用扩展卡尔曼滤波估计误差系数。由滤波中的估值方差矩阵计算各误差系数之间的相关系数,用相关系数分析系统的可观性,并将所有相关系数之和最小作为优化指标,利用遗传算法得到最优的位置组合。仿真结果表明,采用该方案可以有效辨识出惯导平台中与加速度高阶项有关的各项误差系数。     

弹丸弹托结构参数对挤进阻力的影响研究

为了研究某滑膛武器弹丸弹托的不同结构参数及摩擦系数对挤进阻力的影响,分别以弹丸弹托的不同结构参数及摩擦系数作为单一变量,利用Ansys-workbench有限元软件分别对其挤进过程进行数值模拟仿真,得到挤进阻力的变化,进而分析该结构参数对挤进阻力的影响,从而为该滑膛武器弹丸结构设计提供了重要依据,也为同类武器的弹托设计提供了一定的参考价值。     

军用车辆采用锂电池驱动时电源管理控制系统的设计

军用车辆采用锂电池组作为动力源可有效解决排放问题,具有高机动性、隐蔽性、稳定性的特性,并能为未来的军用电磁火力平台配置创造条件。其中的电源管理系统关系到军用车辆的电源实施监测控制运行,系统工作效果决定了军用车辆使用的可靠性。通过对军用车辆动力锂电池组电源系统的优化设计,可使锂电池组电源管理控制系统的设计效率得到全面提升。在进行电源管理系统的初步设计过程中,通常需要采用多种不同的方式对其动力体系进行初步的评估。主要针对军用车辆动力锂电池组电源管理系统进行设计分析,并提出了相应的优化措施。     

面向联合作战行动设计的态势差分析机理研究

文章介绍了态势差的概念内涵,分析了在设计联合作战行动时为什么要分析态势差,阐述了如何分析态势差。态势差分析是工程化作战筹划的一个环节,研究态势差分析机理,能为作战行动设计提供有力支撑,提高作战筹划效率。     

A model to predict the residual life of aircraft engines based upon oil analysis data

This paper reports on a study using the available oil monitoring information, such as the data obtained using the Spectrometric Oil Analysis Programme (SOAP), to predict the residual life of a set of aircraft engines. The relationship between oil monitoring information and the residual life is established using the concept of the proportional residual, which states that the predicted residual life may be proportional to the wear increment measured by the oil analysis programmes. Assuming such a relationship between wear and the residual life exists, we formulated a recursive prediction model for the item's residual life given measured oil monitoring information to date. A set of censored life data of 30 aircraft engines (right censored due to preventive overhaul) along with the history of their monitored metal concentration information are available to us. The metal concentration information includes many variables, such as Fe, Cu, Al, etc.; not all of them are useful, and some of them may be correlated. The principal component analysis (PCA) has been adopted to reduce the dimension of the original data set and to produce a new set of uncorrelated variables, which we shall use in the prediction model. The procedure associated with estimating model parameters is discussed. The model is fitted to the actual SOAP data from the aircraft engines, and the goodness‐of‐fit test has been carried out. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

跳频电台自动测试系统设计

目前跳频电台的最好的检测方式是采取综合测试系统代替传统的测试仪器。以采样定理为基础,通过对三种跳频电台采样方案的比较得出结论,黑盒中频数字化方法是目前最合理的选择。给出了基于PCI总线构建跳频电台自动测试系统的硬件平台和软件测试方法。跳频电台自动测试系统可以完成对跳频电台指标的测试,并具有通用性。     

基于MTA的攻击机系统外部设计的一种方法

以多任务攻击为研究对象,研究了以作战效能为准则的基本原理,以MTA(Mulit-TaskAttackera)在其作战生存期内的研制、试验、生产和维护总费用W作为作战效能指标,讨论了W的构成情况,阐述了MTA概念综合设计的主要任务,MTA典型可选方案和概念综合化设计模型系统的构成及典型MTA概念综合优化设计的基本算法,研究成果对军用飞机的概念综合优化设计具有重要理论和工程应用参考价值.     

高隔离度干涉截止滤光片的设计与制备

根据光通讯无源器件和激光探测仪器对光学薄膜的特殊需求,采用解析法和自动优化法综合设计了高隔离度的干涉截止滤光片,分析了膜厚改变2%对设计膜系的透过率曲线的影响,通过莱宝APS1104镀膜机对所设计的膜系进行了实际镀制,获得了性能优良的高隔离度截止滤光片.